Viewing Stereo Images on a Computer
There are a variety of methods to view stereo images on computer monitors. We will go over the easiest to adapt to home use and will not discuss the more esoteric albeit impressive methods.
To produce a stereo image a left and right image is needed. The easiest method is to place the stereo pair's left image on the left, and the right image on the right side of the screen. This can be free viewed if the image is not too large and the user is able to maintain proper control over their eyes. This requires a bit of training and for most casual viewers cannot be done easily. Some optical viewers for looking at stereo cards (prints) work for images displayed this way. We offer the stereo card viewer for images of around 8" or less per pair, the View Magic 6 x 6 and our Hyper-View viewer for larger images. Standard unmodified stereoscopes generally don't work because the tongue which holds the card on the viewer does not allow the viewer to get close enough to the screen to focus.
A new variant is the ScreenScope. This has a fixture which attaches the mirrored viewer to the computer and allow viewing without the aid of shutter glasses which allows it to work on a laptop computer.
Cross Eyed Viewing
Placing the images right view first followed by the left view allows the user to free view using the cross eyed method. This is easier for most people than parallel viewing but there is no viewer available which will allow people who cannot freeview to look at these images. Many web sites present their images in a left/right/left format three photos across in order to accommodate both freeviewers and people with viewers.
Special mirrored viewers are made for over/under format. The most common one is the View Magic. Over/Under format involves using a mirror system to separate the left and right images which are placed on top of one another. The mirrored viewer can be held parallel to the monitor for best results.
Another method is to convert a computer image into an anaglyph. The separate left and right images are color converted so that only one of the image can be viewed through a corresponding color gel. They are then put together on the same image base allowing the channels to be separated later by the viewer using so called 3d glasses (usually red/blue or red/green). This can be done using PhotoShop or any other advanced image editor. These can also be achieved using some of the computer programs and applets mentioned below.
The advantage to this is no special applet or program is need, just anaglyph glasses. The disadvantages are that this method generally does not reproduce color well. The color filters can interfere with the colors present in a scene and high contrast in the initial image can cause significant ghosting. Skillful editing can limit this but it generally does not entirely eliminate the problems. With grayscale images these problems are much less apparent. Also the viewer needs the 3D glasses to view the images.
In the last 5 years commercially available shutter glasses have come down in price so they are available to the consumer for well under $100. These glasses generally work by using LCD crystals turning on and off coinciding with the alternating left and right images on the computer screen. They can be limited by the resolution and refresh rate of the monitor/videocard set up. They have the advantages of better reproduction of color than anaglyphs. Generally they do not work on laptops.
Software, Java Applets and Browser Plug-ins
Several software programs are available for converting left and right digital images to stereo pairs which are then ready for easy viewing. These programs can produce images in the JPS format (a compressed stereo image format) whose viewing method can be determined by the person using the plug-in. They also can save in various other formats such as cross-eyed and wall-eyed for later printing. Most have settings that support most or all of the viewing methods mentioned above. However the discontinuation of Shock and other internet standards have made many of these useless. HTML5 standardization has helped and some programs such as Stereo Photo Maker have made making stereo web pages compliant with the new standards. Please do an internet search to find the latest methods.Back to Technical page.
[ Order ]
Berezin Stereo Photography Products 21686 Abedul, Mission Viejo, CA 92691 USA (949) 215-1556 or 1554 We accept PayPal!Please contact us with questions or comments about this web site. All content, unless otherwise noted ©2021 Berezin Stereo Photography Products