Follow us on
[Your Basket]
[Search]
[Mailing List]
Product Categories

3D Lens in a Cap Specifications:

Film    Digital    Macro

Film Lens in a cap

Lens Type: 3D, parallel view
Lens system: 38 mm, f11, 2 elements, plastic
Film Format:
35 mm standard film (24x36 mm)
Diaphragm: Sliding disc, f11 & 22
Focusing: Sliding lever 1.5m, 3m, infinity
Special Feature:
Turns an SLR camera into a 3D camera using normal processing. Usually retains many of the features of an SLR camera, such as  through the lens viewing, auto exposure, TTL flash.  Please see below for special information about SLR digital cameras.
SLR body mounts: Pentax K, Canon EOS, Canon FD, Nikon F, Olympus OM, Minolta MD, Minolta AF
Dimensions:
104 x 65 x 60mm (W xH x L)
Weight:
100g

Digital 3D Lens in a Cap Specifications

Note: The LOREO 3D Lens in a Cap for use with APS and digital SLR cameras is slightly different from the one for standard SLRs because current digital SLRs (2002) do not have full frame (35mm) sensors. Non-full frame digital cameras typically have a focal length multiplier of 1.5 - 1.6. The "D" version 3D Lens in a Cap is specially converted from a regular 3D Lens in a Cap to compensate for the non-full frame cropping. Examples of non-full frame digital cameras include the Canon Digital Rebel, D30, D60, 1D, 10D, Rebel 300D, Nikon D1, D1X, D1H, D100, D70, D2H, Pentax *ist, Fuji Finepix S1 Pro, S2 Pro. The 3D Lens in a Cap is known to work with these cameras.

 

LOREO Digital 3D Lens in a Cap  - Specifications

Lens Type: 3D, parallel view
Lens system: 25 mm, f8-16, 5 element retrofocus with 2 aspheric surfaces, plastic polymer composite
Sensor Format:
Subframe digital SLR sensor - ~ (22 - 24) x (14.5 - 16) mm
Diaphragm: Twin Blade, f8, f11, f16 with click stops
Focus adjustment: Focusing slider continuous from 1.5m to infinity.
Focusing range: 1.5m to infinity.
Accessory Lens: 52mm filter thread. Maximum outer diameter 65 mm. Minimum rear lens diameter 44mm. Suitable for wide angle converters.
Special Feature:
Gives a subframe digital SLR camera 3D capabilities using normal processing. Retains many of the features of an SLR camera, such as through the lens viewing, auto exposure, TTL flash.
Digital SLR body mounts: Pentax K, Canon EOS, Nikon F, Minolta AF, Sony Alpha, Samsung GX (Pentax K). Not available for Olympus OM.
Dimensions:
Measured head on facing the lens: W = 140mm, H = 70mm, L = 72mm (including mount)
Weight:
200g

Digital SLR Compatibility list for 3D Lens in a Cap


Non-full frame digital SLR cameras
----------------------------------

Non-full frame digital cameras which work with the 3D Lens in a Cap (T)
include:

Canon EOS D30, D60, 10D, 20D, 30D, Rebel 300D, 350D, 400D (Canon EOS
mount) - Most Canon SLR cameras work with the 3D Lens in a Cap (T) in
auto-metering mode.  Use the 101DC for these.

Nikon D1, D1X, D1H, D2H, D2X, D100, D200, D2H, D70, D70s, D50, D80
(Nikon mount) - Nikon digital SLRs work with the 3D Lens in a Cap (T) in
manual mode. In most Nikon digital SLRs, over-exposure is shown on the
LCD screen after a picture has been taken. This function can be used in
place of auto-metering.  Use the 101DN for these.

Pentax *ist D, *ist DS, DS2, DL, DL2, K10D, K100D, K110D (Pentax K)
- most Pentax SLR cameras work with the 3D Lens in a Cap (T) in
auto-metering mode.  Use the 101DP for these.

Fuji Finepix S1 Pro, S2 Pro, S3 Pro, S5 Pro (Nikon mount)- Fuji digital
SLRs work with the Nikon mount 3D Lens in a Cap (T) in manual mode.  Use the 101DN for these.

Minolta Maxxum 5D, 7D (Minolta AF mount) - requires shutter lock to be
disabled. Minolta digital SLRs work with the 3D Lens in a Cap (T) in
manual mode.  Use the 101DM for these.

Sony Alpha DSLR-A100 (Minolta AF mount) - requires shutter lock to be
disabled. Developed jointly with Minolta. Sony Alpha Lens mount is
compatible with Minolta AF lenses. The 3D Lens in a Cap (T) is known to
work with this camera.  Use the 101DM for these.


Samsung GX-1S (Pentax K mount, untested)

All Olympus digital SLR cameras, including the E1, E300, E330, E500, do
not work with the 3D Lens in a Cap (T). The FOV crop factor is 2:1.
Also, the new Olympus mount is incompatible with the old one.



Full frame digital SLR cameras
------------------------------

Full frame digital cameras which work with the full frame 3D Lens in a
Cap include the Canon 1Ds, 1Ds Mark II, EOS 5D, Kodak Pro DCS-14n.  Use the 101C for these cameras.

To be confirmed: Kodak DCS Pro SLR/c, 14 mp, Canon mount, Kodak DCS Pro
SLR/n, 14 mp, Nikon mount.
 
Non-compatible digital SLR cameras
----------------------------------
The Canon 1D and 1D Mark II are not currently compatible with the 3D
Lens in a Cap (T) because they have a different FOV crop factor.


Field of View (FOV) crop factor of Digital SLR cameras
------------------------------------------------------
Digital SLR cameras commonly have a field of view (FOV) crop factor of
1.5 - 1.6x. The Lens in a Cap and PC Lens in a Cap will work with this
crop factor with a corresponding change in the focal length. No
modification to the product is necessary. With 3D pictures however, if
the image is cropped on either side, there will be a problem with the 3D
effect because the two sides do not match any more. The 3D Lens in a Cap
(T) is converted from the original full frame 3D Lens in a Cap to
accommodate this cropping effect.  See above to see what cameras this effects.



Automatic light metering with the 3D Lens in a Cap
--------------------------------------------------
To determine whether an SLR camera will work with any Lens in a Cap or
3D Lens in a Cap product in automatic light metering mode, try taking a
picture with no lens on the camera. If the camera works without a lens
in automatic light metering mode or program mode, then it should work
with a Loreo Lens in a Cap product. The Lens in a Cap range of products
are all-manual devices. They have no electronics to communicate with the
camera body.

Some manufacturers, notably Minolta and Nikon (recent models such as
their digital SLRs), electronically detect their own lenses and will not
function in automatic mode when a non-approved third party lens is
attached. When such a lens is used, the camera can only be used in
manual mode. Canon and Pentax SLR cameras tend to be more accommodating.
It is usually quite straightforward to use these cameras in auto
metering mode with Lens in a Cap products. However, it may be necessary
to adjust the metering level to -1 or -1.5 stops. A few test shots will
quickly show the level of compensation required.

EOS - The TTL meter can be used, but since the light path is split, you
may need to set the exposure compensation dial to minus -1.5 to -2 stops.


Full frame 3D Lens in a Cap with full frame digital SLR cameras
---------------------------------------------------------------
Full frame digital SLR cameras require the full frame 3D Lens in a Cap.
It is not advisable for the non-full frame modified 3D Lens in a Cap (T)
to be used with full frame SLR cameras.

There is an issue with coverage when the 3D Cap is used with a full
frame digital SLR like the Canon EOS 5D. The 3D Lens in a Cap has
asymmetric light paths which do not fully cover 100% of a print film
negative, only the area which is normally printed by a photo lab. On the
negative there will be slight vignetting on one side of the image. This
is normal. Full frame digital SLRs use the full area of their 24x36 mm
image sensor, which reveals the vignetting. Unfortunately the problem
cannot be fixed now.

LOREO 3D Macro Lens in a Cap Specifications

Lens Type: 3D, parallel view
Lens system: 38 mm (effective 60mm), f11, 2 elements, plastic polymer composite
Sensor Format:
Subframe digital SLR sensor - ~ (22 - 24) x (14.5 - 16) mm
Diaphragm: Twin Blade, f11, f16, f22 with click stops
Focus adjustment: Focusing ring.
Focusing range: 9 - 33 inches (23 - 85 cm) measured from the front of the lens.
Lens Extension: 52 mm filter mount for lightweight accessories such as filters and number 1 - 4 closeup lenses.
Special Feature:
Gives a digital SLR camera macro 3D capabilities using normal processing. Retains many of the features of an SLR camera, such as through the lens viewing, auto exposure, TTL flash.
Digital SLR body mounts: Pentax K, Canon EOS, Nikon F, Minolta AF, Sony Alpha, Samsung GX (Pentax K). Not available for Olympus OM.
Dimensions:
53 x 70mm (L x D) (length measured with EOS mount)
Weight:
80g (with EOS mount)

To Buy

[ Order ] 

Berezin Stereo Photography Products 21686 Abedul,  Mission Viejo, CA 92691 USA  (949) 215-1554  We accept PayPal! 

Please contact us with questions or comments about this web site. All content, unless otherwise noted 2019  Berezin Stereo Photography Products