Follow us on
[Your Basket]
Product Categories
Computer Viewing
How We See Depth
Slide Bar
Scan Roll
HyperView Inst.
Cleaning POV
Links Page
Clip-on 3-D Viewer
Canon Twin Rig
Stereocard B&W
Stereo Base Calculator
Replacing Kodaslide Lens
Wheatstone Directions
Webring Page
Canon Twin
StereoCard Printing
8P Modification
Dual Cable Release
Home Up
About Us
Tech Support FAQ
Reel 3D Cross Ref
Order Info

Dual Cable Release 

by Richard Rylander

Click for a slightly larger view.

A dual cable release is an item that's pretty easy to build yourself, and very inexpensive. The image above shows one I put together for about $10 (two $4.95 cable releases, a bit of angled aluminum, and a piece of plastic 1" x 1/2" x 1/4"). I would suggest you remove (unscrew completely) the time exposure locking screws if the releases you use have them. "Dynamic synchronization" is achieved by rocking your thumb until you begin to feel resistance in both plungers. This kludge has worked well for me, never "locked up", and the price and availability couldn't be beat. 

Editor's NoteAnother suggestion to refine the above technique has been to remove the two thumb pieces and replace it with a single piece of plexi-glass.  This would be made easier by starting with cable releases which have unsrewable thumb pieces. 

[ Order ] 

Berezin Stereo Photography Products 21686 Abedul,  Mission Viejo, CA 92691 USA  (949) 215-1554  We accept PayPal! 

Please contact us with questions or comments about this web site. All content, unless otherwise noted 2018  Berezin Stereo Photography Products